Multi-breaker control LS-6XT P1
Woodward’s easYgen | LS-6XT control is synchronizer controller with integrated mains decoupling and protection features. It enables several redundant communication schemes with peer controls. The applications range from independent synch check relay to complex power management sys-tem with multiple utility feeds, bus tie breakers and group breakers in combination with Kuhse KEA 350 equipped genset controllers and/or easYgen | GC-3400XT equipped genset groups.
Redundant busses running among the peer controls ensure that availability of your power generation asset is not compromised to a single point of failure. The LS-6XT control together with KEA 350 controls are designed to support OEM switch-gear builders, generator packagers, and system integrators standardize on a single hardware for a multitude of utility parallel or island operations.
Off-the-shelf LS-6XT control is software configurable for one/two breaker control, gensets / genset groups handling, and stand-alone/multi-unit application.
The LS-6XT controller is available in a rugged aluminum powder coated housing. An LED Annunciator plate is integrated to the front for local annunciation of alarms that are customizable on-site. Kuhse RP300 is supported over a separate Ethernet network that works as remote operator control panel.
Redundant busses running among the peer controls ensure that availability of your power generation asset is not compromised to a single point of failure. The LS-6XT control together with KEA 350 controls are designed to support OEM switch-gear builders, generator packagers, and system integrators standardize on a single hardware for a multitude of utility parallel or island operations.
Off-the-shelf LS-6XT control is software configurable for one/two breaker control, gensets / genset groups handling, and stand-alone/multi-unit application.
The LS-6XT controller is available in a rugged aluminum powder coated housing. An LED Annunciator plate is integrated to the front for local annunciation of alarms that are customizable on-site. Kuhse RP300 is supported over a separate Ethernet network that works as remote operator control panel.
- Mounting: cabinet mounting
- Operation: with integrated LEDs, without haptic keys
- Breaker control: 2 breakers
- Type: back panel control
- Up to 32 LS-6XT controls are supported with up to 32 KEA 350.
- Up to 64 LS-6XT are supported in one network with up to 16 GC-3400XT, each group consisting up to 31 gensets.
- In group controller applications that require the LS-6XT to work inside the group (with KEA 350) AND outside the group (with group controllers), up to 32 LS-6XT can be used with KEA 350 and up to 64 LS-6XT can be used with group controllers.
- Purpose-built software to support single bus or redundant bus communications.
- Three independent true RMS AC measurement (system A, system B and auxiliary voltage).
- Remotely selectable breaker transition modes: Open, Closed (short parallel <100ms), Inter-change, Indefinite parallel.
- Internal power calculation with option to feed-in active power from external transducer.
- Phase match or slip frequency synchronization with voltage matching.
- Several built-in protection elements (including ROCOF, phase shift and flexible limits for custom protection).
- Segment control for the load sharing.
- Automatic date and time synchronization between the LS-6XT units and the connected KEA 350 controls.
- Detailed interface communication diagnostics to monitor, visualize and troubleshoot all the connected controls in the network.
- LS-6XT “Stand alone” mode without the KEA 350 is possible.
- Custom logic and configurable I/Os driven by LogicsManager and AnalogManger.
- HMI supported with RP300 offering standard and customizable screens.
Supported controllers:
/∆):
- KE350 P1, 350 RP P1, 350 P2, 350 RP P2
- Power supply 12/24 VDC (8 to 40 VDC)
- Power consumption max. 22 W
- Ambient temperature (operation): -40 to 70 °C / -40 to 158 °F
- Ambient temperature (storage): -40 to 80 °C / -40 to 176 °F
- Ambient humidity: 95%, non-condensing
/∆):
- 100 VAC Rated (Vrated) 69/120 VAC, Max. Value (Vmax) 86/150 VAC,
- 400 / 600 VAC Rated (Vrated) 400/690 VAC, Max. Value (Vmax) 520/897 VAC, Rated Surge Voltage. (Vsurge) 6,0 kV
- Accuracy class 0,5
- Measurable alternator windings 3p-3w, 3p-4w, 3p-4w OD, 1p-2w, 1p-3w
- Setting range primary 50 to 650,000 VAC
- Linear measuring range 1.25 × VN
- Measuring frequency 50/60 Hz (30 to 85 Hz)
- High impedance input; resistance per path 2.5 MOhm
- Max. Power consumption per path < 0.15 W
- Rated (Irated) 1 A or 5 A
- Linear measuring range IsystemA = 3.0 x Irated / IsystemB = 1.5 × Irated
- Burden < 0.10 VA
- Rated short-time overcurrent (1 s) [1] 50 × Irated, [5] 10 × Irated
- Accuracy class 0.5
- Setting range 0.5 to 99,999.0 kW/kvar.
- Accuracy class 1.0
- Input range 12/24 VDC (8 to 40 VDC)
- Input resistance approx. 20 kOhm
- Contact material AgNi
- Load (GP) AC: 2.00 AAC at 250 VAC, DC: 2.00 ADC@24 VDC
- Type 1 = 0 to 1 V, 0 to 2000 Ohm, 0 to 20mA
- Resolution 16 bit
- Maximum permissible voltage against genset ground: 9 V
- Maximum permissible voltage genset ground to PE: 100 V
- Type 1 = +/-10V / +/- 20mA / PWM
- Basic insulation voltage (AO#2) 500 VAC
- Reinforced insulation voltage (AO#2) 300 VAC
- Insulation voltage (AO#1) 100 VAC
- Resolution 12 bit
- Output ± 10 V (scalable) Internal resistance
- Output ± 20 mA (scalable) Maximum load 500 Ω
- powder coated Sheet metal housing
- Dimensions W x H x D = 250 × 228 × 50 mm
- Connection screw/plug terminals 2.5 mm²
- Protection system IP 20
- Weight approx. 1,750 g
- CE, UL/cUL, EAC (pending)
- Manual LS-612 XT (17.12 MB)
- Datasheet LS-612 XT (6.5 MB)
- paper strip original LS-612 XT (8.71 KB)
- paper strip template LS-612 XT (341.93 KB)
