Multi-breaker control LS-522
Woodward’s LS-5 Series are synchronizer controllers with integrated mains decoupling and protection features. The applications range from independent synch check relay to complex power management relay with multiple utility feeds, bus tie breakers and group breakers in combination with Kuhse KEA 350 equipped genset controllers. Wiring efforts are reduced to a minimum, since only one CAN bus connection is required between all LS-5 and easYgen controllers to transmit AC measurement signals, I/O states, flags etc.
The LS-5x2 relays simplify the applications where load bus is served by a mains circuit breaker (MCB) and a generator group breaker (GGB). It senses voltage and current, quantifies the synchronization parameters and transmits the signals via CAN bus to the KEA 350 genset controllers. The two breakers control capability along with mains decoupling and protection features make it a perfect choice for transfer switch control under guidance of an external supervisory control. The LS-5x2 is software selectable to be applied as an LS-5x1 thereby facilitating hardware standardization to OEM switchgear builders, generator packagers, and system integrators.
The LS-5x2 Series is available in two different mounting styles. An LS-522 with a plastic housing and graphic LCD display is designed to be mounted on the cabinet’s front door. An LS-512 with an aluminum powder coated housing without display is designed to be back panel mounted.
The LS-5x2 relays simplify the applications where load bus is served by a mains circuit breaker (MCB) and a generator group breaker (GGB). It senses voltage and current, quantifies the synchronization parameters and transmits the signals via CAN bus to the KEA 350 genset controllers. The two breakers control capability along with mains decoupling and protection features make it a perfect choice for transfer switch control under guidance of an external supervisory control. The LS-5x2 is software selectable to be applied as an LS-5x1 thereby facilitating hardware standardization to OEM switchgear builders, generator packagers, and system integrators.
The LS-5x2 Series is available in two different mounting styles. An LS-522 with a plastic housing and graphic LCD display is designed to be mounted on the cabinet’s front door. An LS-512 with an aluminum powder coated housing without display is designed to be back panel mounted.
- Mounting type: door mounting
- Operation: with display, with haptic buttons
- type: compact control
- switch control: 2 breakers
- current measurement system A & B: optional 1A / 5A
- Up to 16 LS-5x2 relays can be operated in one network with up to 32 KEA 350 genset controllers
- Remotely selectable breaker transition modes: Open, Closed (short parallel <100ms), Interchange, Indefinite parallel
- Software selectable to function as one breaker control
- Internal power calculation with option to feed active power from external transducer
- Phase match or slip frequency synchronization with voltage matching
- Full protection package (including df/dt (ROCOF), phase shift, and mains voltage increasing protection according to new German grid code
- Segment control for the load sharing
- Event Log with up to 300 entries
- Automatic date and time synchronization between the LS-5 units and the connecte KEA 350 controls
- LS-5 “Stand alone” mode without the KEA 350 is possible
- Preconfigured application modes that simplify the configuration process for complex multi-breaker applications
- AUTOmatic and MANual mode
- Full remote control via CAN or RS-485 interface
- Breaker open/close failure detection
- Mains decoupling “Test” mode
- Lock keypad feature
- 4 freely configurable alarms
- 8 Freely configurable LED`s on the LS-512 back panel mountable device
- Multilingual capability: English, German, Spanish, French, Italian, Portuguese, Japanese, Chinese, Russian, Turkish, Polish
Supported controllers:
/∆):
- KE350 P1, 350 RP P1, 350 P2, 350 RP P2
- Power supply 12/24 VDC (8 to 40 VDC)
- Power consumption max. ~ 5 W (LS-512)
- Power consumption max. ~ 6 W (LS-522)
- Ambient temperature (operation): -20 to 70 °C / -4 to 158 °F
- Ambient temperature (storage): -30 to 80 °C / -22 to 176 °F
- Ambient humidity: 95%, non-condensing
/∆):
- 120 VAC Rated (Vrated) 69/120 VAC, Max. Value (Vmax) 86/150 VAC, Surge Voltage. (Vsurge) 2,5 kV
- 480 VAC Rated (Vrated) 277/480 VAC, Max. Value (Vmax) 346/600 VAC, Rated Surge Voltage. (Vsurge) 4,0 kV
- Accuracy class 1,0
- Linear measuring range 1.25 × VN
- Measuring frequency 50/60 Hz (30 to 85 Hz)
- High impedance input; resistance per path [1] 0.498 MOhm, [4] 2.0 MOhm
- Rated (Irated) [1] /1 A or [5] /5 A
- Linear measuring range Igen = 1.5 × Irated
- Burden < 0.15 VA
- Rated short-time current (1 s) [1] 50 × Irated, [5] 10 × Irated
- Accuracy class 0.5
- Input range 12/24 VDC (8 to 40 VDC)
- Input resistance approx. 20 kOhm
- Type 1 = 0 to 1 V, 0 to 2000 Ohm, 0 to 20mA
- Resolution 16 bit
- Maximum permissible voltage against genset ground: 9 V
- Maximum permissible voltage genset ground to PE: 100 V
- Contact material AgCdO
- Load (GP) AC: 2.00 AAC at 250 VAC, DC: 2.00 ADC@24 VDC / 0.36 Adc@125 Vdc / 0.18 Adc@250 Vdc
- Pilot duty (PD) AC: B300, DC: 1.00 Adc@24 Vdc / 0.22 Adc@125 Vdc / 0.10 Adc@250 Vdc
- powder coated Sheet metal housing
- Dimensions W x H x D = 219 × 171 × 61 mm
- Front cutout WxH = 186 [+1.1] × 138 [+1.0] mm
- Connection screw/plug terminals 2.5 mm²
- Front insulating surface
- Sealing Front IP66 (with screw fastening)
- Front IP54 (with clamp fastening)
- Back IP 20
- Weight approx. 850 g
- Dimensions WxHxD 190 × 167 × 47 mm
- Connection screw/plug terminals 2.5 mm²
- Protection system IP 20
- Weight (plastic/sheet metal) approx. 850/840 g
- CE, UL/cUL, BDEW, VDE AR-N 4105, EAC
- Pending: LR, ABS
- Datasheet LS512_LS522 (773.52 KB)
- Manual LS512_LS522 (6.6 MB)
