The easYlite-200 is designed to remotely display the status of a generator control system through a CAN BUS or a Modbus RS-485 Interface. The easYlite-200 may be used where an additional status display is required, which is directly controlled by the generator control unit.
The system provides 16 configurable LEDs with 3 colours each. Up to two annunciators can be interfaced with one KEA 3X0.
The monitored statuses are transmitted from the generator set control system to the easYlite-200. The easYlite-200 LEDs change their state if the assigned warning / alarm condition occurs or the status conditions change.
The annunciator is equipped with selfdiagnostic checks and status LEDs to indicate the connection and power status to ease in identification of faults. The easYlite-200 is equipped with a relay to operate an external horn or alarm.
The unit is configured with a PC via RS-232 interface.
- Mounting type: door mounting
- the labelling is done by using paper strips
- the KEA 3X0 must be operated with at least firmware version 2.15 for the easYlite 200 to be compatible
