ESEPRO Gateway
PROFIBUS Gateway - ESEPRO
ESEPRO Gateway

PROFIBUS Gateway - ESEPRO

Product No.:
2GESEPRO00
on request on request
903,00 EUR

plus 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description
ESEPRO is a Profibus gateway specifically designed to interface Kuhse KEA 3X0 series genset controls with Profibus-DP networks.It interfaces via the CAN bus with Kuhse controls and is easy to configure using standard Profibus configuration tools like Simatic Manager.

A single ESEPRO added to the CAN network will make all Visualisation Data of connected CANopen controls available without adding additional load to the CAN bus communication. The Visualisation Data is buffered in the ESEPRO gateway which decouples Profibus' cyclic process I/O from the CANopen cyclic TPDO transfers.

The connection between gateway and KEA 3X0 is made via an ACNBus cable (not included in the scope of delivery). 
 

Scope of delivery:

  • PROBUS gateway, without CANBus cable
Specifications
Supported controllers:
  • KEA 320, 320 RP, 350 P1, 350 RP P1, 350 P2, 350 RP P2, LS-5
Interfaces:
  • 1 Profibus
  • 1 CAN
  • 1 Ethernet for monitoring/diagnosis
User interface:
  • Power, Device, Profibus/CAN & Ethernet Status LEDs
  • Web browser interface for Monitoring
Profibus interface:
  • DE9F with Profibus standard pin assignment
  • EIA-485-A (RS-485) physical layer
  • 9.6 kBit/s - 12 MBit/s
  • Profibus DP-V0 and DP-V1 slave
  • 500 V galvanic isolation
CAN interface:
  • DE9M with industry standard CiA DS-102 Pinout
  • ISO 11898 physical layer
  • 250 kBit/s
  • CANopen consumer & client
  • Addresses up to 8 nodes
Ethernet port:
  • IEEE 802.3i 10BASE-T
  • IP, TCP, HTTP, ARP, TFTP
  • 1.5 kV galvanic isolation
Power requirements:
  • 10-30 V DC, 1 W
  • 30 mA typical @ 24 V DC

High availability:
  • Watchdog monitoring
  • Brown-out detection
Electromagnetic compatibility:
  • Emissions CISPR 22/EN 55022 (Class A)
  • Immunity EN55024
  • Electrostatic discharge EN61000-4-2
  • Radiated RF EN61000-4-3
  • Fast transients EN61000-4-4
  • Conducted RF EN61000-4-6
Environment:
  • 0° to 60 °C / 32 to 140 °F Operating temperature.
  • -25° to 80 °C / -13 to 185 °F Storage temperature
  • 10 to 95% humidity, non-condensing
Form Factor/Housing:
  • Self-extinguishing PC/ABS (UL 94-V0)
  • 35 mm DIN rail mounting
  • IP 20 / NEMA Type 1
  • Convection cooling
  • 101 x 22.5 x 120 mm / 3.98 x 0.886 x 4.72 in.
  • 0.13 kg / 0.287 lbs
Compliance:
  • C-Tick
  • CE, RoHS
  • FCC Part 15 (Class A)
  • ICES-003 (Class A)
Documents
Installation Guide ESEPRO  (207.5 KB)
Manual ESEPRO  (2.85 MB)
Application Note ESEPRO  (666.75 KB)
GSD Files ESEPRO (PROX)  (3.36 KB)
GSD Files ESEPRO (DPV)  (3.09 KB)
Datasheet ESEPRO  (1.1 MB)

This product is similar to:

ATS Control Front
TOP
ATS-Control DTSC-200A
  • Mounting: door mounting
  • Breaker control: 2 breaker
  • Current Load: 5A
1.165,00 EUR
CAN-ESEPRO connection cable 3,0 m - on request...
  • usable in combination with the PROFIBUS Gateway - ESEPRO
  • for connection of KEA 3X0 genset controls to Profibus-DP networks
0,00 EUR
KEA 320 Front
TOP
Genset control KEA 320 Lite
Genset control for a single emergency power supply
Front panel mounting
2.178,00 EUR
KEA 320 RP Front
Genset control KEA 320 RP Lite
Genset control for a single emergency power supply
Cabinet mounting
1.891,00 EUR